Closed
1030 N Pine Rd, Texas City, TX 77591
Best Plumbers in Texas City, TX
Texas City sits on Galveston Bay's western shoreline, and its dual housing stock — mid-century galvanized-plumbed homes near the historic core and refinery corridor alongside PEX-plumbed 2010s–2020s production homes in Lago Mar and Park Place South — creates two very different plumbing realities under one City of Texas City permit roof. Salt-air corrosion accelerates pipe and fitting degradation faster than inland Houston neighborhoods, while the area's census median build year of 1981 means a significant share of homes still carry original copper or galvanized supply lines that have been stressed by Gulf humidity for four-plus decades. If you own property here, understanding which plumbing era your home belongs to — and who actually governs your permits and HOA approvals — is the starting point for every plumbing decision.
Verified against Google Business data
Updated 2026
See the 10 Plumbers Serving Texas City 
- Median home built
- 1981
- Median home value
- $190,600
- FEMA flood zone
- X (low)
- Typical cost (est.)
- $900–$12,000+
- Most common local issue
- Salt-air corrosion of exposed copper and galvanized fittings in pre-1990 homes
Ranked by verified Google rating × review volume × verification tier. How we rank →
Some highly-rated pros serve Texas City from nearby and may not keep a Texas City street address. Those are listed under "Also serving Texas City" with their real city and distance, so you always know where each business is based.
Min rating:
10 resultsBased in Texas City
Open Now
113 Brown St, La Marque, TX 77568
Open Now
3422 Palmer Hwy #1134, Texas City, TX 77590
Open Now
2312 25th Ave N, Texas City, TX 77590
Open Now
4802 FM1765, Texas City, TX 77591
Open Now
2002 11th Ave N, Texas City, TX 77590, suite 144, Texas City, TX 77592
Also serving Texas City
Highly-rated pros based nearby who cover Texas City. Distance shown from the Texas City area.
Open Now
Serving Texas City Galveston · 7.5 mi away
Open Now
Serving Texas City Galveston · 7.8 mi away
Open Now
Serving Texas City Galveston · 7.9 mi away
Open Now
Serving Texas City Galveston · 8 mi away
Plumbers in Texas City: What You Should Know
Galvanized and Copper Pipe Corrosion in Texas City's Older Core Neighborhoods
Why it matters to you
Homes built near the historic core and refinery corridor — many dating to the 1950s through 1980s — were plumbed with galvanized steel or copper supply lines that are now 40 to 70 years old. Galveston Bay's salt-laden air and the industrial micro-environment near the Texas City dike accelerate oxidation of exposed fittings, hose bibbs, and under-sink connections far faster than what an inland Sugar Land homeowner would see. Pinhole leaks in copper and rust-scale blockages in galvanized lines are among the most common plumbing service calls in Texas City's older neighborhoods, and left unaddressed they reduce water pressure, contaminate drinking water, and set up costly water-damage claims.
What a good pro does
A qualified plumber should start with a whole-home pressure test and a visual inspection of all accessible supply lines to distinguish corroded galvanized sections from still-serviceable copper runs. Where galvanized pipe is found, full replacement to PEX — which resists the coastal humidity and eliminates rust-scale — is the practical long-term answer; partial spot repairs on 50-year-old galvanized pipe typically just shift the failure point. All repiping in Texas City requires a plumbing permit and inspection through the City of Texas City Permits and Inspections Department, and the plumber supervising the work must hold a current Texas State Board of Plumbing Examiners license.
Sources: Texas State Board of Plumbing Examiners, Municipal permit office (see area profile)
Water Heater Sediment and Accelerated Failure Along Galveston County's Groundwater Supply
Why it matters to you
Texas City and the broader Galveston County service area draw water from sources with moderate-to-high mineral hardness, and the near-100% summer humidity in this coastal community punishes water heaters installed in garages or utility closets. Mineral sediment accumulates on tank bottoms, forcing burners to work harder, while the salt-humid air corrodes anode rods and pressure-relief valves faster than manufacturer timelines assume. Homeowners with tank water heaters over eight years old — a large portion of the census median 1981-era housing stock — are operating equipment past its practical Gulf Coast service life.
What a good pro does
Ask your plumber to pull the anode rod during any service visit: a rod corroded to the core wire means the tank is already self-destructing from the inside. Replacing a standard 50-gallon gas tank water heater in Texas City runs approximately $900–$1,800 installed (2024 estimate), while a tankless gas unit with exterior venting runs $2,000–$4,500 installed — both require a City of Texas City plumbing permit regardless of which option you choose. A TSBPE-licensed plumber will size the unit correctly for Texas City's incoming water temperature and hardness rather than applying a one-size-fits-all spec from a northern-climate manual.
Sources: Texas State Board of Plumbing Examiners, Municipal permit office (see area profile), International Residential Code (as adopted by City of Houston)
Post-Hurricane and Derecho Gas Line Safety in a Coastal Wind Corridor
Why it matters to you
Texas City's position on Galveston Bay puts it squarely in the approach path of Gulf tropical systems and the kind of fast-moving derecho that struck the greater Houston region in May 2024. High-wind events cause structural racking, tree impacts, and foundation micro-movement that can crack or separate CSST (corrugated stainless steel tubing) gas lines at fittings — a particular concern in homes built before 2010, when CSST bonding requirements were not yet uniformly enforced in Galveston County construction. Delayed gas leaks are common: a fitting that survived the storm may fail weeks later as the structure continues to settle.
What a good pro does
After any storm that causes visible structural movement or tree contact with your home, request a licensed plumber to perform a gas pressure test on all interior lines before restoring appliance service — Texas law requires this step before the gas utility reconnects service following a confirmed leak. The City of Texas City permits and inspects gas line repairs independently of Houston's permitting system, so confirm your plumber is pulling the permit locally. TSBPE-licensed plumbers or a licensed engineer are the only parties authorized under Texas law to certify gas line integrity for utility reconnection.
Sources: Texas State Board of Plumbing Examiners, Municipal permit office (see area profile), Local HOA / deed restrictions (see area profile)
HOA Approval Requirements for Outdoor Plumbing in Lago Mar and Park Place South
Why it matters to you
Newer master-planned communities in Texas City — including Lago Mar, managed by Principle Management Group, and Park Place South — carry mandatory HOA deed restrictions that require architectural review before homeowners can install or modify exterior plumbing elements such as tankless water heater vents, irrigation system heads, hose bibb relocations, or exterior cleanout covers. Because these subdivisions were built primarily in the 2010s and 2020s, their HOA frameworks are actively enforced, and a plumber who completes code-compliant work without the required HOA pre-approval can leave you facing fines or mandatory removal of finished work regardless of whether the City of Texas City issued a permit.
What a good pro does
Before signing any contract for exterior plumbing work in Lago Mar or Park Place South, request written confirmation from the relevant HOA management company that the scope is approved — or get the plumber to include HOA submittal coordination in their proposal. City of Texas City permits and HOA approvals are separate parallel tracks that must both be completed; passing the city inspection does not substitute for HOA sign-off. Confirm your plumber's TSBPE license number on the board's public lookup before work begins, and verify HOA status lot-by-lot through the Galveston County Clerk or hoa.texas.gov since deed restriction coverage varies even within a single development.
Sources: Local HOA / deed restrictions (see area profile), Municipal permit office (see area profile), Texas State Board of Plumbing Examiners
Plumbers in Texas City: What You Should Know
Hiring plumbers in Texas City? Texas City is an incorporated Galveston County city with a wide range of housing stock, from newer master-planned communities like Lago Mar to older neighborhoods near the historic core and refineries. Homeowners here face coastal weather exposure, salt-air corrosion, and varying flood risk depending on elevation and proximity to the bay. Permitting runs through the City of Texas City, not Houston, and HOA requirements vary significantly by subdivision.
- Housing era
- Mixed — older core neighborhoods date to the mid-20th century
- Foundation
- Predominantly slab-on-grade in modern subdivisions
- Flood zone
- FEMA Zone X (low flood risk) per official NFHL data
- Permits
- City of Texas City Permits and Inspections Department (independent municipality, not Houston Permitting Center)
Housing stock & systems
Building era
Mixed — older core neighborhoods date to the mid-20th century; master-planned communities like Lago Mar and Park Place South are primarily 2010s–2020s construction.
Typical style
Modern production-builder suburban homes (brick and stone, one- and two-story) in newer subdivisions; older areas feature more varied Gulf Coast residential styles.
Foundations
Predominantly slab-on-grade in modern subdivisions; some older coastal and bay-adjacent homes may be pier-and-beam or raised construction — confirm via Galveston County Appraisal District records.
Common systems
Newer homes feature modern central HVAC, PEX or CPVC plumbing, and 200-amp electrical panels; older homes may have original ductwork, galvanized or copper plumbing, and smaller electrical services requiring upgrades.
What that means for repairs
Older homes near the historic core often need HVAC modernization, electrical panel upgrades, and corrosion-related exterior repairs due to salt air and industrial proximity. Newer HOA communities focus on cosmetic upgrades and energy efficiency improvements.
Permits & restrictions
Permit jurisdiction
City of Texas City Permits and Inspections Department (independent municipality, not Houston Permitting Center).
HOA & deed restrictions
Mixed — mandatory HOAs govern newer subdivisions including Lago Mar Owners Association (managed by Principle Management Group) and Park Place South Homeowners Association. Older neighborhoods may have only recorded deed restrictions with no active HOA. HOA status must be confirmed lot-by-lot via deed records, Galveston County Clerk, or hoa.texas.gov.
Historic districts
No City of Houston historic district designation confirmed. Texas City is a separate incorporated municipality; any local historic designations would be administered by the City of Texas City.
Contractor note
Contractors must pull permits through the City of Texas City, not Harris County or the City of Houston. HOA-governed subdivisions like Lago Mar and Park Place South require architectural approval before exterior work begins; confirm requirements with the specific HOA management company.
Flood & weather
FEMA flood zone
FEMA Zone X (low flood risk) per official NFHL data. However, Texas City is a low-lying coastal community along Galveston Bay, and localized flooding can occur in areas near Dickinson Bayou, Moses Lake, and the bay shoreline. Flood risk varies significantly by subdivision and elevation.
Hurricane Harvey impact
Specific Harvey 2017 flood depths and damage data for Texas City subdivisions were not confirmed in available research. As a low-lying coastal community in Galveston County, Texas City likely experienced storm surge and rainfall impacts, but street-level or subdivision-specific flood data should be verified through FEMA claims records, the Galveston County Appraisal District, or the Texas General Land Office.
Heat & humidity load
Extreme humidity and salt air from Galveston Bay accelerate exterior corrosion on HVAC condensers, metal roofing components, and fasteners. Older homes without adequate insulation or modern HVAC systems face heavy cooling loads. Mold risk is elevated in poorly ventilated homes, especially those with pier-and-beam foundations near the coast.
Working with contractors here
Texas City's dual housing stock creates two distinct contractor markets. In newer master-planned communities like Lago Mar and Park Place South, work centers on warranty-period punch lists, fence and patio additions within HOA guidelines, and energy-efficiency upgrades. In older neighborhoods, contractors commonly handle HVAC system replacements, electrical panel upgrades from 100-amp to 200-amp service, re-piping from galvanized to PEX, and exterior repairs driven by salt-air corrosion. Coastal proximity means roofing contractors must account for wind uplift ratings and corrosion-resistant fasteners. All work requires City of Texas City permits, and contractors unfamiliar with the local permitting process should budget additional time compared to Houston-area jurisdictions.
Local Tip
Always ask for a written estimate before work begins. Texas contractors are required to provide one on jobs over $1,000.
About Texas City
Texas City is an incorporated Galveston County city with a wide range of housing stock, from newer master-planned communities like Lago Mar to older neighborhoods near the historic core and refineries. Homeowners here face coastal weather exposure, salt-air corrosion, and varying flood risk depending on elevation and proximity to the bay. Permitting runs through the City of Texas City, not Houston, and HOA requirements vary significantly by subdivision.
- Median year built
- 1981
- Median home value
- $190,600
- Owner-occupied
- 53.9%
- Population
- 54,159
- Housing units
- 23,248
- Median income
- $65,447
Source: U.S. Census Bureau, ACS 5-Year 2023
Flood & storm risk
FEMA Zone XLow flood riskMost of Texas City maps to FEMA Zone X (low mapped flood risk), but Houston's flash-flood reality means even low-risk blocks benefit from smart drainage and storm-hardened installs; as a Galveston County coastal community, tropical surge and wind add a layer generic guidance misses.
Source: FEMA National Flood Hazard Layer (NFHL). Flood zones vary by parcel — verify your individual FIRM panel.
Houston Storm Readiness in Texas City
Hurricane & flooding
Even in Texas City, TX, where mapped flood risk is low, hurricane-force winds and prolonged rainfall can fracture PVC supply lines at slab penetrations — have a plumber locate and label your main shutoff so you can close it within minutes if a pipe fails after the storm passes. Beryl 2024 showed that well-outside-the-floodplain neighborhoods still lose water service when distribution mains are damaged, so knowing your shutoff location is essential. As a Galveston County community, Texas City may follow county rather than City of Houston storm rebuild rules.
Severe storms & hail
Straight-line winds from the May 2024 derecho exceeded 100 mph in some Houston corridors and toppled trees onto exterior gas lines in neighborhoods with low flood exposure like Texas City, TX — after any severe wind event, have a plumber perform a gas-system pressure test before restoring appliances. Even a small nick in a buried CSST line from root movement or a fallen limb can be difficult to detect without professional equipment. Confirm the current FEMA panel for your Texas City parcel — the area maps to Zone X, but adjacent lots can differ.
Ice storms & freezes
If a pipe bursts during an ice storm in Texas City, TX, close the main shutoff immediately and call a plumber before opening any faucets to drain the system — allowing full flow before a plumber has assessed the break location can send hundreds of gallons through wall cavities before anyone knows where the split is. Uri 2021 showed that the secondary water damage from delayed shutoff actions cost far more than the pipe repair itself. With a median build year of 1981, the older building stock here is more exposed to hard-freeze damage than newer construction. As a Galveston County community, Texas City may follow county rather than City of Houston storm rebuild rules.
Sources: FEMA National Flood Hazard Layer (NFHL), Ready.gov -- Hurricanes, CenterPoint Energy -- Storm Center, City of Houston -- Emergency Preparedness, Ready.gov -- Winter Weather, Harris County Flood Control District
Free Texas City Tools & Calculators
Houston-specific estimators to plan your project before you call a pro. All results are planning estimates — a licensed local pro confirms the details on site.
Houston Freeze Prep & Pipe Insulation Checklist
Open full tool & FAQ →Your freeze checklist — 4 tasks
- 1
Disconnect & drain every outdoor hose bib
Remove hoses, drain the spigots, and cover each with an insulated faucet sock. Un-drained hose bibs are the #1 burst point in a Houston freeze.
- 2
Insulate exposed pipes in the attic & garage
Wrap any pipe in an unconditioned space (attic runs, garage walls) with foam sleeves. Houston homes rarely insulate these because they only matter a few nights a year — which is exactly why they burst.
- 3
Open cabinet doors & keep a pencil-width drip
On hard-freeze nights, open kitchen/bath cabinets so warm air reaches the pipes and let faucets on exterior walls drip to relieve pressure.
- 4
Protect the attic/garage water heater & its lines
An attic or garage tank sits in unconditioned space. Insulate the cold-inlet and hot-outlet lines and confirm the emergency drain pan is clear so a leak doesn't reach the ceiling.
This is a planning estimate only — actual requirements depend on an on-site assessment by a licensed Houston pro. If a pipe has already burst, shut off your main water supply and call a licensed Houston plumber immediately — freeze bursts flood fast.
Frequently Asked Questions
Do I need a permit from the City of Texas City to replace my water heater or repipe my house?
Yes — the City of Texas City Permits and Inspections Department (not the City of Houston or Harris County) requires a plumbing permit for water heater replacements, repiping, sewer line work, and gas line modifications. Any plumber pulling that permit must hold a current Texas State Board of Plumbing Examiners license, which you can verify on the TSBPE public lookup before work begins. Budget a few extra days compared to Houston proper, since Texas City runs its own inspection schedule independent of Harris County jurisdictions.
Sources: Municipal permit office (see area profile)Texas State Board of Plumbing Examiners
My Texas City home was built in the early 1980s — how do I know if I have galvanized pipes that need replacing before they fail completely?
With a census median build year of 1981, a significant share of Texas City's older core homes were plumbed in galvanized steel, which typically reaches end-of-life around 40–50 years — meaning many of those pipes are at or past that threshold right now. Warning signs include rust-colored water at first draw, low pressure at multiple fixtures simultaneously, and visible orange or white mineral crust at threaded fittings. A licensed plumber can run a pressure test and inspect exposed sections in the crawl space or under sinks to give you a condition assessment before a burst forces the issue.
How much should I expect to pay for a full repipe in an older Texas City home, and how long does the job typically take?
In the Houston-metro market, a whole-home repipe from galvanized or copper to PEX for a 1,500–2,500 sq ft home runs an estimated $4,000–$12,000 installed — but Texas City jobs on older pier-and-beam or slab homes near the historic core can edge toward the higher end if access is complicated by tight crawl spaces or salt-air–damaged fittings. Most crews complete a single-story repipe in two to three days, with an additional one to two days for the City of Texas City inspection and drywall patch scheduling. Get at least two itemized bids that separately list permit fees, because the Texas City permit cost is an add-on the plumber must pull locally.
Sources: Municipal permit office (see area profile)
Texas City is right on Galveston Bay — does the salt air actually affect the plumbing inside my walls, or only the outdoor fixtures?
Salt-laden coastal air primarily attacks exposed and semi-exposed components: exterior hose bibs, irrigation backflow preventers, CSST gas line fittings at exterior penetrations, and tankless water heater venting that terminates on an exterior wall. Inside fully enclosed walls, copper and PEX are largely protected, but fittings and valves in unconditioned spaces like garages, utility closets with exterior vents, and under-home crawl spaces of older raised homes can show accelerated pitting corrosion. When getting a plumbing estimate in Texas City, ask the plumber specifically whether they'll inspect all semi-exposed brass or copper valves as part of the job scope.
Texas City is in FEMA Zone X, so do I still need to worry about sewer backflow or flood-related plumbing damage?
FEMA Zone X means your parcel carries low mapped flood risk from riverine or coastal surge modeling, but Galveston County's flat topography and storm-drain systems can still overwhelm during intense Gulf rainfall events like those that accompanied Beryl in 2024, pushing water back through floor drains and toilets even in Zone X neighborhoods. Homes built before the mid-1990s are particularly unlikely to have backwater (check) valves installed on the sewer lateral. A licensed plumber can camera your cleanout to confirm whether your drain exits have a working backwater valve and whether your cast-iron or older PVC lateral is still intact after repeated wet seasons.
Sources: FEMA National Flood Hazard Layer (NFHL)Harris County Flood Control District
I'm in Lago Mar — do I need HOA approval before a plumber can install a tankless water heater with an exterior vent, or is a city permit enough?
A City of Texas City plumbing permit is legally required, but it is not a substitute for Lago Mar Owners Association architectural review, which governs any visible exterior modification including tankless water heater vent terminations, gas line penetrations through exterior walls, and irrigation backflow covers. The Lago Mar HOA is managed by Principle Management Group, so submit an architectural change request before your plumber schedules installation — approval typically takes one to three weeks. Skipping HOA review on a permitted, code-compliant job can still result in fines or a forced change order to relocate the vent to a less visible side of the home.
Sources: Local HOA / deed restrictions (see area profile)Municipal permit office (see area profile)